Miele G 6510 Operating Instructions Manual Download Page 59

Page: 59 / 104

Programme options

FlexiTimer with EcoStart

The FlexiTimer



gives you three ways

of starting the programme by means of

delaying the start. You can set the start

time or the finish time of a programme.

You also have the option of taking ad‐

vantage of time variable economy rates

of electricity using the

EcoStart

function.

When using the Delay start function,

make sure that the detergent com‐

partment is dry before adding deter‐

gent. Wipe dry with a cloth if neces‐

sary. If the compartment is wet,

powder detergent can become lum‐

py and stick to the dispenser, with

the result that it is not fully dis‐

pensed.

Do not use liquid detergent when se‐

lecting Delay start, as it can run into

the dishwasher before it is required.



To prevent children coming into

contact with dishwasher detergent:
Do not fill the detergent dispenser

until just before starting the pro‐

gramme

, i.e. before you activate the

FlexiTimer with

. Also activate the

door safety lock.



Switch the dishwasher on with the



button.

The

Start

indicator light will flash.



Select the programme you want.



Press the



button.

You can use the



arrow buttons to

select the

Start at

Finish at

, or

EcoStart

function or

Back 



Confirm selection of the function you

want with

The current time of day will appear and

the hour number block will be highligh‐

ted.
You can now enter the time you want

using the



arrow buttons and con‐

firm with

If, while you are setting the time, you do

not press any buttons for several sec‐

onds, the display will revert to the previ‐

ous menu. You will then have to enter

your settings again.

If the time of day (clock) display has

been switched off (see "Settings menu

- Time of day"), the display will go out

after a few minutes and only the

Start

indicator light will flash slowly.
Press any button to switch the display

back on again for a few minutes.

Summary of Contents for G 6510









































































































Search results

Summary of Contents for G 6510

Reviews:

Related manuals for G 6510

Brands by name

Popular brands

Miele G 6510, Operating Instructions Manual

Search results

Summary of Contents for G 6510

Reviews:

Related manuals for G 6510

Brands by name

Popular brands