Imp
ort
Ap
plia
nce
s.c
om
THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.
Setting the correct boiling point for water
Before cooking food for the first time, you must set the boiling
point for water, as this varies according to the altitude of the
location of the appliance. This procedure also flushes out the
waterways.
This process
must
be carried out to ensure efficient
functioning of your appliance.
^
Run the appliance using steam cooking
2
(100 °C) for
15 minutes. Proceed as described in "Operating
principles".
If you
move house
, the appliance will need to be re-set for
the new altitude if this differs from the old one by more than
300 m. To do this, descale the appliance (see "Cleaning and
care > Descaling").
Heating up the appliance
To remove the grease from the ring heating element, heat the
appliance up with nothing in it at 200 °C using the Fan plus
programme for 30 minutes. Proceed as described in
"Operation".
There will be a slight smell the first time the heating element is
heated up.
The smell and any vapours will dissipate after a short time,
and do not indicate a faulty connection or appliance. It is
important to ensure that the room is well ventilated during this
operation.
Using for the first time
27
Summary of Contents for DGC 6300
Page 161: ...ImportAppliances com THE EASIEST WAY TO SELF IMPORT APPLIANCES DIRECT FROM EUROPE 160 ...
Page 162: ...ImportAppliances com THE EASIEST WAY TO SELF IMPORT APPLIANCES DIRECT FROM EUROPE 161 ...
Page 163: ...ImportAppliances com THE EASIEST WAY TO SELF IMPORT APPLIANCES DIRECT FROM EUROPE 162 ...
Page 164: ...ImportAppliances com THE EASIEST WAY TO SELF IMPORT APPLIANCES DIRECT FROM EUROPE 163 ...
