![Midea MVUR252B-VA3 Service Manual Download Page 126](http://html1.mh-extra.com/html/midea/mvur252b-va3/mvur252b-va3_service-manual_1791261126.webp)
DM14-01.01.18en
MIV V5 Heat Recovery DC Inverter R410A
Installation Procedure
124
FLA:
Full Load Amps. (A)
KW:
Rated Motor Output (KW)
12.3 Electric wiring installation
Note:
Please select power supply for indoor unit and outdoor unit separately.
The power supply should have specified branch circuit with leakage protector and manual switch.
The power supply, leakage protector and manual of all the indoor units connecting to the same outdoor unit should be
universal. (Please set all the indoor unit power supply of one system into the same circuit. It should turn on or shut down the
unit at the same time, otherwise, the service life would affect seriously, even the unit may not turn on.)
Please put the connective wiring system between indoor unit and outdoor unit with refrigerant piping system together.
It is suggested to use 3-core shielded wire as signal wire between indoor and outdoor units, multi-core wire is unavailable.
Please comply with relevant National Electric Standard.
Power wiring should be done by professional electrician.
12.3.1 Outdoor unit powering supply wiring
Outdoor unit
Outdoor unit
Outdoor unit
Outdoor unit
GND
GND
GND
GND
Branch box
Leakage
protector
Manual
switch