DMC 2000S Dosimeter
15-00007 Page 19 of 65
5.3 Operation in the pause mode
5.3.1. Normal display
When the
DMC 2000S
dosimeter is in the pause mode, it continuously performs the
operations described on page 10.
The display shows the message
“ PAUSE ”
or
“ affect ” (or wearer’s name)
is
depending on whether or not it is assigned.
#
non-assigned dosimeter:
#
assigned dosimeter:
In the event of a fault, additional, alternating messages are displayed
every 2 seconds (see the example below):
Note
: all dosimeter fault messages are described in Section 10,
beginning on page 51, which includes a troubleshooting guide.
