DMC 2000S Dosimeter
15-00007 Page 40 of 65
In the event that a rate alarm occurs at the same time as a pre-alarm or a dose alarm, the
audible alarm indication is as follows:
1s
On : 150 ms
Off : 50 ms
On : 50 ms
Off : 150 ms
!
display:
#
the message “
Rate Alarm
” flashes. The dose is still displayed (see below):
Note
:
!
the dose rate alarm cannot be silenced via acknowledgement.
!
in the
standard configuration the dose rate alarm is suppressed
by setting the alarm
threshold to the measurement range’s high value.
7.1.5. Time
alarm
!
cause:
#
alarm threshold exceeded
Audible alarm: one beep every second
!
display:
#
the message “
CLOC
” and the measurement alternate on the display (see below) :
Note
:
!
the time alarm threshold be programmed at the factory or by using the LDM 2000 or
LDM 101 dosimeter reader and the DOSIMASS maintenance software.
!
this threshold cannot be adjusted in the autonomous mode.
