DMC 2000S Dosimeter
15-00007 Page 6 of 65
1. General
1.1 Document overview
This document provides the information for using the DMC-2000S electronic dosimeter in two
operating modes:
•
Part of a centralized dosimetry system
•
Operation in the autonomous mode (i.e. as an individual or independent unit)
This document provides information about the dosimeter’s functions (alarms, display), normal
use (alarm acknowledgment) and first level maintenance (replacing the battery,
troubleshooting). For additional information relating to the functions listed below, refer to the
User’ s Manual for the centralized dosimeter system, such as MGPAC or DOSIVIEW.
!
Assigning dosimeters
!
Configuring dosimeters
!
Pass-by readers
For some uses of the DMC 2000S (dosimetry system and teledosimetry applications) additional
equipment is required (MGPAC, LDM, WRM...). For further information, refer to the
corresponding equipment’s User’s Manual.
1.2 Contents
This document contains information regarding:
!
Operating modes
of the DMC 2000S
This section briefly describes the dosimeter’s operating modes and function modes.
!
A
description
of the DMC 2000S
This section describes the dosimeter from the user’s point of view (selector button, display...).
!
Start-up
of the DMC 2000S
This section describes the start-up procedures for the dosimeter.
!
Operation of the DMC 2000S in the
satellite mode
This section details the normal conditions of use for the DMC 2000S as part of a
dosimetry system.
!
Operation of the DMC 2000S in
autonomous mode
