DMC 2000S Dosimeter
15-00007 Page 18 of 65
Switching to pause mode
Switching to the
pause
mode implies deactivating the
DMC 2000S
dosimeter. In other words,
suppressing the dose measurement functions.
In a centralized dosimetry system, switching to the
pause
mode is accomplished when passing
by an LDM 2000 access control monitor.
When switched to the
pause
mode, the display reads as shown below:
!
the functional indicators flash
!
one of the following messages can be displayed (depending on the dosimeter configuration:
assigned or non-assigned...)
#
non-assigned dosimeter:
#
assigned dosimeter:
or name of the wearer, depending on the dosimeter configuration
