Metallwarenfabrik Gemmingen Eisemann T 18000 E, Operating Instructions Manual

Page: 54 / 132

Safety Guidelines
10
0.3 Personnel selection and qualifications; main duties

Work on the machinery/equipment may only be performed by authorized person-
nel. The legally permissible minimum age must be observed!

Only skilled and trained personnel may be used for its operation, setup, mainte-
nance and repair!

Ensure that only authorized personnel work on the machine!

It is the operator’s responsibility – including with regard to transport regulations –
to accept and reject dangerous instructions from third parties!

Personnel being educated, schooled, instructed or in general training may only
work on the machinery/equipment under the constant supervision of an experi-
enced person!

Work on machinery/equipment electrical systems may only be performed by a
qualified electrician or by persons being trained under the direction and supervision
of a qualified electrician in accordance with electrical engineering regulations.

Work on gas equipment (gas appliances) may only be performed by personnel
trained for this.

Only personnel with special skills and experience in hydraulics may work on hy-
draulic devices!
0.4 Safety guidelines for operation

Refrain from any dangerous work methods!

Take steps to ensure that the machinery/equipment is only operated in safe and
proper working condition!

Operate the machinery only when all protective devices and safety-related equip-
ment such as releasable protective devices, emergency stop devices, sound insula-
tion and extractors, are present and functional!

At least once per shift the machinery/equipment should be checked for externally
visible damage and defects! Immediately inform the responsible agency/personnel
of any changes (including operating behaviour)! If possible, immediately shut the
machinery down and secure it!

In the case of malfunctions, immediately shut the machinery/equipment down and
secure it! Fix malfunctions immediately!

Observe on and off procedures and control displays in accordance with operating
instructions!

Before turning on/starting the machinery/equipment, ensure that nobody may be
endangered by the running machinery/equipment!

Do not shut off or remove suction and ventilation devices when the machine is
running!