Megatron GeBE-COMPACT Plus Manual Download Page 3

Page: 3 / 112

Manual

7.5 MOTOR TEMPERATURE AT PERMANENT PRINTING..................................................................................................29

7.5.1 MOTOR TEMPERATURE AT PERMANENT PRINTING GPT-4672-PM with HSP-2208.........................................29
7.5.2 MOTOR TEMPERATURE AT PERMANENT PRINTING GPT-4672-M with HSP-2128...........................................30
7.5.3 MOTOR TEMPERATURE AT PERMANENT PRINTING GPT-4673-PM with HSP-3208.........................................31

8 PAPER SPECIFICATION........................................................................................................................................................32

8.1 PAPER SPECIFICATION for printer with presenter and HSP-2208-GB printer mechanism.........................................32
8.2 RELEASED PAPERS with limited specification...........................................................................................................32
8.3 RECOMMENDED PAPERS for printer without presenter.............................................................................................32

9 CONTROL MARK (BLACKMARK)..........................................................................................................................................33

9.1 POSITION OF CONTROL MARK....................................................................................................................................33
9.2 TICKET LENGTH..........................................................................................................................................................34
9.3 SENSORS FOR DETECTION OF PAPER END AND BLACKMARK..................................................................................35

9.3.1 SENSOR INTERCONNECTION FOR STANDARD PRINTER..................................................................................35
9.3.2 SENSOR INTERCONNECTION FOR THE „EASY LOADING“ PRINTER..................................................................35
9.3.3 SENSOR RATIO TO PRINT LINE AND CUTTING POSITION.................................................................................36

10 CONTROLLER DESCRIPTION..............................................................................................................................................37

10.1 GeBE CONTROLLER GCT-46620 FOR GPT-4672........................................................................................................37
10.2 GeBE CONTROLLER GCT-46630 FOR GPT-4673........................................................................................................37
10.3 CONNECTION PINNING.............................................................................................................................................38

10.3.1 CONTROLLER GCT-46620 and GCT-46630.......................................................................................................38

11 POWER SUPPLY.................................................................................................................................................................41

11.1 GPT-467x WITH CONTROLLER GCT-46620 V1.4 / GCT-46630-V1.0..........................................................................41
11.2 STANDARD POWER SUPPLY.....................................................................................................................................42

12 INTERFACES.......................................................................................................................................................................43

12.1 RS232........................................................................................................................................................................43
12.2 USB...........................................................................................................................................................................44

13 EXTERNAL SENSORS.........................................................................................................................................................45

13.1 FOR GPT-467x with CONTROLLER GCT-46620-V1.4 / GCT-46630-V1.0....................................................................45
13.2 REFLEX FOR NPE, EXIT AND AUX4...........................................................................................................................46

14 ADDITIONAL CIRCUIT BOARD............................................................................................................................................47

14.1 GCT-46620-20/30 / GCT-46630-20/30......................................................................................................................47

14.2 NPE NEAR PAPER END SENSOR...............................................................................................................................49

15 FIRMWARE.........................................................................................................................................................................51

15.1 TABLE OF MOST IMPORTANT SYSTEM PARAMETERS.............................................................................................52

16 DRIVERS AND SOFTWARE DEVELOPMENT KIT (SDK).......................................................................................................53

16.1 PRINTER DRIVERS....................................................................................................................................................53
16.2 SDK...........................................................................................................................................................................53

GeBE Elektronik und

phone

+49.89.894141-0

GeBE-document-no. GPT-467x-C32-E-MAN-V1.0-1001

Feinwerktechnik GmbH

fax

+49.89.894141-33

date

May 19, 2021

Beethovenstrasse 15

page 3 | 112

82110 Germering

email

[email protected]

Our general terms of business are to be applied.

Germany

www.gebe.net

Errors and changes reserved.

Summary of Contents for GeBE-COMPACT Plus

















































































































Search results

Summary of Contents for GeBE-COMPACT Plus

Reviews:

Related manuals for GeBE-COMPACT Plus

Brands by name

Popular brands

Megatron GeBE-COMPACT Plus, Manual

Search results

Summary of Contents for GeBE-COMPACT Plus

Reviews:

Related manuals for GeBE-COMPACT Plus

Brands by name

Popular brands