Megatron GeBE-COMPACT Plus Manual Download Page 12 | Manualshive

Page: 12 / 112

background image

Manual

2.2.6 CORRECT PAPER GUIDANCE

Inadequate paper guidance is the most common cause of problems:

•

The paper roll must be able to move freely. It must not drag or jam.

•

If the paper roll diameter is large and a fast printout is required, a tension control is necessary. Please note that

the printer does not have to "pull" more than the specified max. traction.

Please ask.

•

The paper guide just in front of the printer determines the correct paper flow, NOT the guide of the paper roll. If

the roll is close to the printer, the guideance in the printer is sufficient. If, on the other hand, the roll is large and
far away, a LONG paper guide on the printer is strongly recommended.

Please ask.

•

The paper should be bent as little as possible in the feeder.

Such “bends” can cause disturbances due to the “memory effect”. The paper feed should be carried out as
straight as possible following the paper guideance in the printer.

We recommend using the paper guide for large rolls!

2.2.7 CORRECT INSTALLATION POSITION

Printer without presenter:

The printer was designed for the installation situation "horizontal" to "vertical". Any angle in between is acceptable. If the
intended installation position is changed, the correct functioning of the printer cannot be fully guaranteed.

Figure 3

Printer with presenter:

The function of the presenter depends on the paper maintaining the correct tension so that the loop cannot collapse. If
the installation position is not horizontal and the loop is too large, it can also collapse.
The printer was designed for the installation situation "horizontal". If the intended installation position is changed, the
correct functioning of the printer cannot be fully guaranteed.

Figure 4

GeBE Elektronik und

phone

+49.89.894141-0

GeBE-document-no. GPT-467x-C32-E-MAN-V1.0-1001

Feinwerktechnik GmbH

fax

+49.89.894141-33

date

May 19, 2021

Beethovenstrasse 15

page 12 | 112

82110 Germering

email

[email protected]

Our general terms of business are to be applied.

Germany

www.gebe.net

Errors and changes reserved.

12

«
...
10
11
12
13
14
...
»

Summary of Contents for GeBE-COMPACT Plus

















































































































Reviews:

No comments

Related manuals for GeBE-COMPACT Plus

Brand: DataCard Pages: 2

Brand: Panasonic Pages: 83

Brand: Panasonic Pages: 32

Power Defense PD3

Brand: Eaton Pages: 4

Brand: Xerox Pages: 414

Brand: Xante Pages: 25

NANOCOLOR UV/VIS II

Brand: Macherey-Nagel Pages: 6

Brand: Canon Pages: 37

Brand: Samsung Pages: 549

Brand: Olivetti Pages: 438

da Vinci 1.0 Pro

Brand: XYZ Printing Pages: 11

Brand: BIXOLON Pages: 59

Brand: Maxim Pages: 69

Brand: MAC TOOLS Pages: 2

Brand: Wasp Pages: 86

Brand: Olivetti Pages: 69

Posligne ODP-1000

Brand: AURES Pages: 4

Brand: Phoenix Contact Pages: 52

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands