Megatron GeBE-COMPACT Plus Manual Download Page 2

Page: 2 / 112

Manual

LIST OF CONTENTS

1 GENERAL................................................................................................................................................................................6

1.4.1 FUNCTION KEYS...................................................................................................................................................8
1.4.2 STATUS LED.........................................................................................................................................................8

1.5 CONTROLLER FEATURES..............................................................................................................................................9

2 PRESENTER FUNCTIONS.....................................................................................................................................................10

2.1 FUNCTIONAL ELEMENTS............................................................................................................................................10
2.2 IMPORTANT HINTS FOR PRESENTER OPERATION.....................................................................................................11

2.3 IMPORTANT HINTS FOR PRINTER OPERATION..........................................................................................................13

2.3.1 THERMAL PRINTING ON PRE-PRINTED FORMS................................................................................................14

3 ELECTRICAL PARAMETER....................................................................................................................................................19

3.1 GPT-467x - CONTROLLER GCT-46620-V1.4 / GCT-46630-V1.0...................................................................................19

4 MOTOR CURRENTS..............................................................................................................................................................21

4.1 CONTROLLER GCT-46620 AND GCT-46630.................................................................................................................21

4.1.1 GPT-4672 with CONTROLLER GCT-46620 / PRINTER MECHANISM HSP-2208.................................................21
4.1.2 GPT-4672 with CONTROLLER GCT-46620 / PRINTER MECHANISM HSP-2128 (12V)........................................21
4.1.3 GPT-4673 with CONTROLLER GCT-46630 / PRINTER MECHANISM HSP-3208 / HSP-3512..............................21

4.2 MOTOR TORQUE..........................................................................................................................................................22

4.2.1 HSP-2208 PRINTER AND CUTTER.....................................................................................................................22
4.2.2 HSP-2108 PRINTER, CUTTER AND PRESENTER................................................................................................22
4.2.3 HSP-3208 / HSP-3512 PRINTER AND CUTTER..................................................................................................23

4.3 GPT-467x CUTTER MOTOR..........................................................................................................................................24

4.3.1 ERROR HANDLING.............................................................................................................................................24

5 CONTROL OF PRINTING POWER..........................................................................................................................................25

5.1 CALCULATION OF THE PRINTING CURRENT...............................................................................................................25
5.2 CURRENT SETTING DEPENDING ON THE FUSE @24 VDC.........................................................................................26

5.2.1 SETTING GPT-4672 for HSP-2208 @24V / HSP-2108 @12 V............................................................................26
5.2.2 SETTING GPT-4673 for HSP-3208 @24 V..........................................................................................................26
5.2.3 SETTING GPT-4673-M 300dpi for HSP-3512 @24 V..........................................................................................26

6 TEST PRINTOUT...................................................................................................................................................................27

6.1 EXAMPLE: STANDARD TICKET WITH HSP-2208 / PRESENTER @24 VDC.................................................................27

7 PRINTER TESTS WITH HSP-2208-GB..................................................................................................................................28

MEGATRON, s.r.o. Mrštíkova 16, 100 00 Praha 10, T.: +420 274 780 972,

[email protected]

www.megatron.cz

Summary of Contents for GeBE-COMPACT Plus

















































































































Search results

Summary of Contents for GeBE-COMPACT Plus

Reviews:

Related manuals for GeBE-COMPACT Plus

Brands by name

Popular brands

Megatron GeBE-COMPACT Plus, Manual

Search results

Summary of Contents for GeBE-COMPACT Plus

Reviews:

Related manuals for GeBE-COMPACT Plus

Brands by name

Popular brands