Megatron GeBE-COMPACT Plus Manual Download Page 32

Page: 32 / 112

Manual

PAPER SPECIFICATION

Paper width GPT-4672:

57.5 – 60.5 mm, recommended: 60±0.5 mm

GPT-4673:

79.5 – 82.5 mm, recommended: 82±0.5 mm

8.1

PAPER SPECIFICATION for printer with presenter and HSP-2208-GB printer mechanism

Paper thickness

72 – 115 µm

Released paper KPW-460

82 µm

8.2

RELEASED PAPERS with limited specification

T8037

84 µm

T1037

105 µm (not for -GB printer mechanism)

KPW490

115 µm (not for -GB printer mechanism)

8.3

RECOMMENDED PAPERS for printer without presenter

Paper thickness

72 – 190µm

Released paper KPW 460

82 µm

KPW 490

115 µm (not for -GB printer mechanism)

KPW 412

142 µm (not for -GB printer mechanism)

KPW 415

185 µm (not for -GB printer mechanism)

T8037

84 µm

T1037

105 µm (not for -GB printer mechanism)

T1237

135 µm (not for -GB printer mechanism)

T1437

145 µm (not for -GB printer mechanism)

T1737

185 µm (not for -GB printer mechanism)

See also our general paper specification TI-DE-0606 for further suitable papers.

GeBE Elektronik und

phone

+49.89.894141-0

GeBE-document-no. GPT-467x-C32-E-MAN-V1.0-1001

Feinwerktechnik GmbH

fax

+49.89.894141-33

date

May 19, 2021

Beethovenstrasse 15

page 32 | 112

82110 Germering

email

[email protected]

Our general terms of business are to be applied.

Germany

www.gebe.net

Errors and changes reserved.

Summary of Contents for GeBE-COMPACT Plus

















































































































Search results

Summary of Contents for GeBE-COMPACT Plus

Reviews:

Related manuals for GeBE-COMPACT Plus

Brands by name

Popular brands

Megatron GeBE-COMPACT Plus, Manual

Search results

Summary of Contents for GeBE-COMPACT Plus

Reviews:

Related manuals for GeBE-COMPACT Plus

Brands by name

Popular brands