Megatron GeBE-COMPACT Plus Manual Download Page 4

Page: 4 / 112

Manual

17 PACKING AND LABELING...................................................................................................................................................54

17.1 PACKING...................................................................................................................................................................54

17.1.1 SINGLE PACKING.............................................................................................................................................54
17.1.2 PACK OF 10......................................................................................................................................................55

17.2 LABELING..................................................................................................................................................................56

17.2.1 BARCODE LABEL..............................................................................................................................................56
17.2.2 TYPE PLATE.....................................................................................................................................................56

18 SERVICE.............................................................................................................................................................................57

19 ASSEMBLY.........................................................................................................................................................................58

19.1 ILLUMINABLE OUTPUT BEZEL..................................................................................................................................58

19.1.1 SCREW FASTENING OF THE BEZELS...............................................................................................................59
19.1.2 ADHESIVE FASTENING OF THE BEZEL............................................................................................................60

20 PRINTER SPECIFICATION..................................................................................................................................................61

20.1 PRINTER MODULE 2“ GPT-4672-M............................................................................................................................61

20.1.1 OPTION GPT-4672-M with LED LIGHTING and EXIT SENSOR..........................................................................63

20.2 PRINTER MODULE 2“ GPT-4672-PM with PRESENTER.............................................................................................65

20.2.1 OPTION GPT-4672-PM with LED LIGHTING and EXIT SENSOR........................................................................67

20.3 PRINTER MODULE 3“ GPT-4673-M............................................................................................................................68

20.3.1 OPTION 3“ GPT-4673-M with SENSOR HOLDER...............................................................................................70

20.4 PRINTER MODULE 3“ GPT-4673-PM with PRESENTER.............................................................................................72

20.4.1 OPTION LED LIGHTING and EXIT SENSOR for GPT-4673-PM..........................................................................74

20.10.1 STANDARD PAPER ROLL HOLDER GPT-4672................................................................................................86

20.10.1.1 STANDARD PAPER ROLL HOLDER 70 mm............................................................................................86
20.10.1.2 STANDARD PAPER ROLLHOLDER 140 mm WITH TENSIONER.............................................................86

20.10.2 PAPER ROLL HOLDER RIGHT GPT-4672........................................................................................................88

20.10.2.1 PAPER ROLL HOLDER RIGHT 70 mm....................................................................................................88
20.10.2.2 PAPER ROLL HOLDER RIGHT 70 mm WITH TENSIONER......................................................................88

20.10.3 STANDARD PAPER ROLL HOLDER GPT-4673................................................................................................90

20.10.3.1 STANDARD PAPER ROLL HOLDER 80 mm............................................................................................90
20.10.3.2 STANDARD PAPER ROLL HOLDER 150 mm WITH TENSIONER............................................................90

20.10.4 PAPER ROLL HOLDER RIGHT GPT-4673........................................................................................................92

20.10.4.1 PAPER ROLL HOLDER RIGHT 80 mm....................................................................................................92
20.10.4.2 PAPER ROLL HOLDER RIGHT 150 mm WITH TENSIONER....................................................................92

20.10.5 EXTERNAL PAPER ROLL HOLDER..................................................................................................................94

20.10.5.1 PAPER ROLL RUNNING LENGTH EXAMPLES........................................................................................94

20.11 PAPER TRAY WITH ATTACHMENT..........................................................................................................................99

20.11.1 FOR GPT-4672-M............................................................................................................................................99
20.11.2 FOR GPT-4674-M..........................................................................................................................................100

21 DECLARATION OF CONFORMITY.....................................................................................................................................101

GeBE Elektronik und

phone

+49.89.894141-0

GeBE-document-no. GPT-467x-C32-E-MAN-V1.0-1001

Feinwerktechnik GmbH

fax

+49.89.894141-33

date

May 19, 2021

Beethovenstrasse 15

page 4 | 112

82110 Germering

email

[email protected]

Our general terms of business are to be applied.

Germany

www.gebe.net

Errors and changes reserved.

Summary of Contents for GeBE-COMPACT Plus

















































































































Search results

Summary of Contents for GeBE-COMPACT Plus

Reviews:

Related manuals for GeBE-COMPACT Plus

Brands by name

Popular brands

Megatron GeBE-COMPACT Plus, Manual

Search results

Summary of Contents for GeBE-COMPACT Plus

Reviews:

Related manuals for GeBE-COMPACT Plus

Brands by name

Popular brands