Megatron GeBE-COMPACT Plus Manual Download Page 53

Page: 53 / 112

Manual

DRIVERS AND SOFTWARE DEVELOPMENT KIT (SDK)

GeBE delivers and supports drivers and SDKs for following operating systems:

16.1 PRINTER DRIVERS

Windows

7 and Windows

32 & 64 Bit

Windows

CE 7.0

Toradex Colibri T30 (ARM Cortex A9)

CUPS Linux Ubuntu 16.04 LTS

64 Bit (32 Bit on request)

CUPS Linux Ubuntu 18.04 LTS

64 Bit (32 Bit on request)

CUPS Linux Ubuntu 19.04 LTS

64 Bit (32 Bit on request)

CUPS Linux Ubuntu 20.04 LTS

64 Bit (32 Bit on request)

16.2 SDK

Windows

7 to Windows

32 & 64 Bit

Windows

CE6.0 u. CE 7.0

Ubuntu LTS 16.04

64 Bit (32 Bit on request )

Ubuntu LTS 18.04

64 Bit (32 Bit on request)

CUPS Linux Ubuntu 19.04 LTS

64 Bit (32 Bit on request)

CUPS Linux Ubuntu 20.04 LTS

64 Bit (32 Bit on request)

OpenSuse, Asparagus 12.1, Leap 42.3

64 Bit (32 Bit on request)

Raspian Stretch 2019-4-08

Raspberry Hardware Pi3

Yocto V2.4 Rocko
Android Studio 3.2.1, Version 6.0 Hardware: Medion MD99851 7" Display

Without support – drivers for operating systems of the past:

Windows

XP , 2000

Windows

CE 4.0, 5.0 and 6.0

Linux Ubuntu 14.04 LTS

Kernel 3.19

32 Bit

Debian 8
Debian 10
Linux Open SUSE Leap 42.3

Kernel 4.4

64 Bit

Linux Open SUSE 12.1

Kernel 3.1

32 Bit

Further Linux distributions or newer versions on request:

General note on Linux and Android drivers:
The specified drivers have been tested on our reference hardware.
Since Linux or Android are very hardware-dependent, the drivers will most likely need to be adapted to a new target
system.

We offer customization as an extra service. Please ask us.

GeBE Elektronik und

phone

+49.89.894141-0

GeBE-document-no. GPT-467x-C32-E-MAN-V1.0-1001

Feinwerktechnik GmbH

fax

+49.89.894141-33

date

May 19, 2021

Beethovenstrasse 15

page 53 | 112

82110 Germering

email

[email protected]

Our general terms of business are to be applied.

Germany

www.gebe.net

Errors and changes reserved.

Summary of Contents for GeBE-COMPACT Plus

















































































































Search results

Summary of Contents for GeBE-COMPACT Plus

Reviews:

Related manuals for GeBE-COMPACT Plus

Brands by name

Popular brands

Megatron GeBE-COMPACT Plus, Manual

Search results

Summary of Contents for GeBE-COMPACT Plus

Reviews:

Related manuals for GeBE-COMPACT Plus

Brands by name

Popular brands