Medical Vcare a Series Page 49 User Manual Download

Page: 49 / 60

Internal battery

Type: Sealed lead acid battery.

Nominal Voltage:

approximately

12V.

Maximal voltage (fully charged battery): 14.9 V

Rated Current : 3.2A

Dimensions: L 13.4 cm X H 6.1 cm X W 6.7 cm

Operation time: ~1 hour.

Charging time from critical to fully charged condition: ~16 hours.

To avoid battery malfunction, connect the Vcare



unit to an external power

adapter when the device is turned off. Battery voltage continues dropping when the

device is off.

Battery warrantee is provided by IVT Medical Ltd for one year from Vcare



purchasing.

Internal suction pump

Max. Vacuum: 650 mmHg / 80 KPa

Rated current: 3.1A

Ambient temperature: ~0-40



Max. operation hours: 5,000.

The Vcare



unit must be returned to IVT Medical at the end of its operational life,

i.e following 5,000 pump operation hours.

Therapy Adjustment Options

Negative Pressure Range: 30-200 mmHg

Modes of Operation: Cyclic-Continuous, Continuous or Intermittent.

External fuse

Quick blow glass fuse 4A / 250V

External Wall Suction Tube

Summary of Contents for Vcare a Series





























































Search results

Summary of Contents for Vcare a Series

Reviews:

Related manuals for Vcare a Series

Brands by name

Popular brands

Medical Vcare a Series, User Manual

Search results

Summary of Contents for Vcare a Series

Reviews:

Related manuals for Vcare a Series

Brands by name

Popular brands