13
1.3.1. EXT
– defines the vacuum source to be external.
1.3.2. INT
– defines the vacuum source to be the internal pump.
1.3.3. FUNC
– this button has the following functions:
•
Long press in Menu Selection Screen: entering System Set-Up
Menus screen.
•
Short press while setting parameters in treatment menu
– displays
the value of the current function in [a] (primary numerical display)
and allows manual setting of the value.
•
Long press while setting parameters in treatment menu
– switches to
System Set-Up Menu screen.
•
Short press in Stand-by mode: entering Treatment menu.
•
Short press while vacuum is operating: displays treatment
settings on the screen (Work/Pause time, Upper/Lower limit and
Max. Flow).
1.3.4. OP/SET
– this button has the following functions:
•
Set a flickering value: While browsing throughout the menus, the
default value of each function is flickering on the screen. By
pressing OP/SET, the user sets the flickering value. This will cause
the value to stop flickering.
•
When the Stand-by screen is displayed, pressing the OP/SET
button will start or stop the vacuum operation.
•
The user can than choose to start working (go to the main screen)
by pressing shortly on the OP/SET button.
1.3.5.
↑ up scroll arrow
1.3.6.
↓ down scroll arrow
The scroll arrows are used in the menus and have the following functions:
•
When a function value is flickering, the user can use the arrows to
switch between values. Long press on the arrow buttons will faster
the scrolling of the available values.
•
When a function value is not flickering the user can use the arrows
to switch between functions (go up and down in the menu).
1.4. LCD Screen Display
Summary of Contents for Vcare a Series
Page 1: ...1 User Manual ...
