36
treatment menu, before reaching the set-up menu.
Second line: "To start over press FUNC"
– start over the set-up
menu.
5.2.7.2. Incase reaching from Stand-By screen (after setting all parameters in
the treatment menu)
First line: "To start treatment press OP/SET"
– returning to the "stand-
by screen".
Second line: "To start over press FUNC"
– start over the set-up menu
5.2.7.3. Incase reaching from Stand-By screen (after yes was chosen at "use
previous setting" screen)
First line: "To Treatment menu press OP/SET" returning to the risk of
bleeding screen.
Second line: "To start over press FUNC"
– start over the set-up menu
Note: as vacuum operation is initiated, the low vacuum alert will be displayed
on the screen until the working negative pressure stabilizes on the desired
level, unless it cannot be stabilized due to leakage.
Vc
ֹare
®
quick instructions guide
1. Verify that the wound doesn't actively bleed.
2. Insert the collection canister into the canister socket
sound….
3. Connect the proximal canister tube to the collection canister.
4. When using mobile stand, make sure the Vcare
®
unit is securely
connected to the mobile stand and that the lock-pin is closed.
5. Connect the Vcare
®
unit using a suitable power adapter (see specifications
chapter) to the wall electrical outlet.
6. Turn the Vcare
®
unit on.
7. Select External/Internal vacuum source (it is advised to use external vacuum source
as possible to avoid burnout of the internal pump).
8. Set the treatment parameters using the Treatment Setting Menu section.
9. Apply wound dressing to the wound (see "Setup for dressing application" for detailed
instructions).
10. Connect the proximal canister tube to the distal connecting tube via the two way tube
connector.
11. Activate vacuum using the OP/SET button on the control panel.
12. Verify that the wound dressing is sealed (inspect the sponge to be evenly
condensed/squeezed.).
Summary of Contents for Vcare a Series
Page 1: ...1 User Manual ...
