33
In case the accumulated fluid volume in the canister exceeds the
maximal volume allowed during operation, an alarm will be activated and the
vacuum operation will be shut down (see the Alarms and Alerts chapter for
more details).
5.1.5. Start Working
When entering the Start Working Screen, the following screen is displayed:
Insert printout
Press OP/SET to go to the Stand-by screen.
Press ↓ to return to the first function in the treatment menu.
Press FUNC for approximately 5 seconds in order to go to the set-up menu.
Note: as vacuum operation is initiated, the low vacuum alert will be displayed
on the screen until the working negative pressure stabilizes on the desired
level, unless it cannot be stabilized due to leakage.
5.2. System Set-Up Menu
In menu selection screen, press FUNC for approximately 5 seconds in order to enter
System Set-Up Screen. While setting treatment parameters, symbol no. 6 appears
on the screen as an indication.
Using the control panel in system set-up menu:
At any stage of system set-up, when a flickering value is displayed, press shortly on
the control panel OP/SET button in order to select the displayed value for the current
treatment parameter, or, use the up and down scroll arrow buttons to brows between
available values for the current parameter and then press OP/SET button to select
the required value.
After pressing OP/SET, the displayed value will stop flickering.
When the value is not flickering, press the Down Scroll arrow button shortly in order
to continue to the next function.
At any stage of the system set-up menu, pressing the FUNC button for
approximately 5 seconds will switch to the Stand-By screen. The user can then
choose to start the vacuum operation by pressing OP/SET.
Summary of Contents for Vcare a Series
Page 1: ...1 User Manual ...
