7
3.2 Mounting
Mount as shown in figure only, with DALI terminals down or else
sufficient cooling will not be possible.
Admissible DIN-rail:TS35/7.5 or TS35/15
For rail fastening:
（ ）
a Tilt the unit slightly rearwards.
（ ）
b Fit the unit over top hat rail.
（ ）
c Slide it downward until it hits the stop.
（ ）
d Press against the bottom for locking.
（ ）
e Shake the unit slightly to check the locking action.
Click
1
3
2
4
3
8
3 3
. Electrical Configuration
DALI end
l
The maximum number of ECGs connected is 64 per bus.
l
cross-section of 1.5
The maximum length is 300m (with a cable
mm²)
KNX end
l
The maximum number of bus devices connected is
256.
l
The maximum length of a line segment is 350 m, measured along
the line between the power supply and the furthest bus device.
l
The maximum distance between two bus devices cannot exceed
700 m.
l
The maximum length of a bus line is 1000 m, keeping into account
all segments
Web browser end (optional)
l
The maximum length is 100m.
L
N
L
N
L
N
L
N
V+
V-
LED
LED
LED
V+
V-
V+
V-
LED Driver(A1)
LED Driver(A2)
LED Driver(A64)
DA
DA
DA
DA
DA
DA
KNX system
KNX BUS
Computer
Setting only
SET
ESC
MOVE
POWER
USB
L
N
DA+ DA-
DALI-A
DA+ DA-
DALI-B
Prog.>1s
K2
μ
K3
μ
K4
μ
K1
μ
ETHERNET
KN- KN+
KNX
DLC-02-KN
DALI Controller
3
