Meanwell DLC-02-KN, Installation Manual

Page: 24 / 50

41
6
The chart shows the dynamic range for this parameter:
ETS-text
Behavior after
KNX Bus power
down value
Value
Behavior after
KNX Bus power up
Value
●
broadcast off
broadcast on
●
●
no action
●
defined value
no action
0 100% –
[0%]
●
switch-off value
switch-on value
●
●
no action
●
defined value
last value
●
no action
0 100% –
[0%]
Dynamic range
[ ] default value [ ] default value
Comment
Uses this parameter to set
the behaviors of the
connected ECGs/lamps in
DALI Bus A and B when
KNX bus voltage falls down.
Actions are all off, all on,
no action or all set to a
certain value.
Use this parameter to set a
desired value
[This option only exists
when defined value in “ “
“Behavior after KNX Bus
power down value is “
chosen]
Uses this parameter to set
the behaviors of the
connected ECGs/lamps in
DALI Bus A and B when
KNX bus is on/ return.
Actions are all off, all on,
no action, all set to a
certain value or all stay at
last value.
Use this parameter to set a
desired value
[This option only exists
when defined value in “ “
“Behavior after KNX Bus
power up is chosen] “
42
6
6.1.1.3 General setting - AFTER MODE
The chart shows the dynamic range for this parameter:
ETS-text
Behavior after
Panic mode
Behavior after
Emergency mode
●
switch-off value
switch-on value
●
●
last value
●
switch-off value
switch-on value
●
last value
●
switch-off value
Dynamic range
[ ] default value [ ] default value
Comment
Uses this parameter to set
the behaviors of the
ECGs/lamps after the panic
mode has finished. If you
choose last value , the “ “
value prior to the panic
mode is saved and the
lamp returns to this value
afterwards.
Uses this parameter to set
the behaviors of the
ECGs/lamps after the
emergency mode has
finished. If you choose
“ “, last value the value
prior to the panic mode is
saved and the lamp returns
to this value afterwards.