43
6
6
4
.1.1. General setting - BROADCAST
The chart shows the dynamic range for this parameter:
ETS-text
Dali n Broadcast
n=A or B
Dimming curve
●
Unchecked
Checked
●
Unchecked
●
log
linear
●
log
Dynamic range
[
]
default value
[
]
default value
Comment
Use this parameter to
enable the broadcast
function.
Sets the dimming curve for
broadcast dimming.
NOTE: This parameter only
sends diming telegrams
according to your setting
and will not transfer the
values to match the
dimming curve of the
ECGs/lamps. Please select
the same curve as the
ECGs/lamps to get the best
dimming performance.
[This option only exists
when “Dali
Broadcast“
n
is checked].
44
6
6
5
.1.1. General setting - RELAY CONTROL
The chart shows the dynamic range for this parameter:
ETS-text
Relay n control
n = [1, 4]
All Relays On/Off
Output mode ★
Send status
★
Send status cyclic
(0= not active)
★
★
Checked
in
All Relays On/Off
chosen
: Only appears when “
”
“
” is
●
Unchecked
Checked
●
Unchecked
●
Unchecked
Checked
●
Unchecked
●
no send, passive
status object
●
at change
●
always at input
of telegram
at change
0 – 65535s
[0s]
●
normally opened
normally closed
●
normally opened
Dynamic range
[
]
default value
[
]
default value
Comment
Use this parameter to
enable the function.
For detailed information,
please refer to 4.1.1.5.1.
Use this parameter to
enable the function.
Defines the default
behavior of the relays.
Sends status signals from
the object All Relays
On/Off with the option you
selected.
Sends status signals from
the object All Relays
On/Off at intervals you
desire.