57
6
Value on ECG
Power Recovery
Value
●
switch-off value
switch-on value
●
●
last value
●
defined value
last value
0 100%
–
[0%]
Uses this parameter to set
the behaviors of the ECG
when DALI bus voltage
falls down. Actions are off,
on, no action or set to a
certain value.
Use this parameter to set a
desired value
[This option only exists
when
defined value
in
“
“
“Value on DALI Power
Fail
is chosen]
“
.
Uses this parameter to set
the behaviors of the ECG
when power recovery.
Actions are off, on, last
value or set to a certain
value.
Use this parameter to set a
desired value
[This option only exists
when
defined value
in
“
“
“Value on DALI Power
Fail
is chosen]
“
.
Value on DALI
Power Fail
Valuel
●
switch-off value
switch-on value
●
●
no action
●
defined value
no action
0 100%
–
[100%]
Dynamic range
[
]
default value
[
]
default value
The chart shows the dynamic range for this parameter:
6
–
.2.1.3 ECG (out group) DIMMING CURVE
ETS-text
Comment
58
6
Sets the dimming curve for
the ECG.
Dimming curve
●
log
●
linear
log
Dynamic range
[
]
default value
[
]
default value
The chart shows the dynamic range for this parameter:
6
–
.2.1.4 ECG (out group) SWITCH
ETS-text
Comment
Switch-Off value
Switch-On fade
time
Switch-Off fade
time
0-100%
[0%]
Immediately, 0.7s,
1.0s, …64s, 90.5s
[2s]
Immediately, 0.7s,
1.0s, …64s, 90.5s
[2s]
Use this parameter to set
the switch-on value. If you
select “last on value”,
the value is set to the dim
value prior to the lamp
being switched off.
Use this parameter to set a
desired value
[This option only exists
when “defined value“ in
“Switch-On value“ is
chosen].
Use this parameter to set
the switch-off value.
Defines the time needed to
achieve the required
setting after switch-on.
Defines the time needed to
turn off or achieve the
required setting after
switch-off
Switch-On value
Valuel
●
last on value
●
defined value
0 100%
–
[100%]
Dynamic range
[
]
default value
[
]
default value
The chart shows the dynamic range for this parameter:
ETS-text
Comment
