83
6
Determines whether an
individual operating hour
calculation is required for
the group.
Sends status signals from
the object in seconds or in
hours.
Sets the life span
(operating hours limit) of
the group after which an
individual alarm is sent.
Sends status signals from
the object Operation Value
at intervals you desire.
Operation hours
calculation
Select data type
Operation hours
limit
Send status every
(0=no active)
●
Unchecked
●
Checked
Unchecked
●
4 Byte value in
second
●
2 Byte value in
hour
4 Byte value in
second
1 – 65535hrs
[10000hrs]
0 – 255hrs
[0hr]
Dynamic range
[
]
default value
[
]
default value
●
Operation hours calculation
The chart shows the dynamic range for this parameter:
ETS-text
Comment
The following chart shows the objects that belong to general
setting:
Number
939
1 bit
[A:Group1]
Operation Hours
Reset
Name
Length
Usage
Resets the operating
hours counter of the
group.
84
6
Number
940
941
4
s
byte
4
s
byte
2
s
byte
[A:Group1]
Operation Hours
Value
[A:Group1]
Operation Hours
Exeeded
Name
Length
Usage
The operating hours of
the group in seconds are
sent via this object. The
internal counter can be
set to 0 (Reset) or
another value via this
object.
This object is used to
report that the operation
hours' counter exceeds
the set threshold.
The operating hours of
the group in hours are
sent via this object. The
internal counter can be
set to 0 (Reset) or
another value via this
object.
Timer enable page is used to activate timer functions.
6 4
.
Timers enable
