MDT Technologies JAL-01UP.02 Technical Manual Download Page 28 | Manualshive

Page: 28 / 84

background image

Technical Manual Shutter Actuator JAL-0X10X.02

MDT technologies GmbH •

51766 Engelskirchen • Papiermühle 1

Tel.: +49-2263-

880 • Fax: +49

-2263-4588

• [email protected] • www.mdt.de

28

28

4.2.1 Blinds

If a channel is selected as a blind, the user has a number of options for parameterization. These are
explained in more detail in the following sections.
As soon as the channel is selected as a blind, three communication objects are shown for this channel
as standard.
The following table shows these communication objects:

Number

Name

Length

Usage

23

Blinds up/down

1 Bit

Movement function of the blinds

24

Slats up/down/stop

1 Bit

Adjustment of the slats/ Stopping of the blinds
movement

Table 6: Communication objects Blinds

The communication object "Blinds Up / Down" is used for the moving function of the blind. Note that
a logical "0" starts the upward movement and a logical "1" starts the downward movement. This
configuration is set by KNX as standard and regulates a uniform communication between KNX
devices
The communication object "slats adjustment / stop" is used for adjusting the slats. Simultaneously,
when this communication object is activated, an active movement function is stopped.

4.2.2 Shutter

The user also has a number of parameterization options available for the shutter function. The blind
function and the shutter function are almost identical, but the parameters for the slats are missing in
the shutter function.
When the channel is selected as blinds, three communication objects are shown for this channel as
standard.
The following table shows these communication objects:

Number

Name

Length

Usage

23

Shutter up/down

1 Bit

Movement function of the shutter

24

Short term operation/Stop

1 Bit

Starts the short term operation /
Is only displayed when activated /
Stops active up-/down movement

25

Stop

1 Bit

Stopping the shutter movement

Table 7: Communication objects Shutter

The communication object "Shutter up/down" is used for the movement function of the shutters.
Note that a logical "0" starts the upward movement and a logical "1" starts the downward movement.
With the object for short term operation, the shutter can be moved in small steps in order to
approach exact positions.
The communication object "Stop" is used to stop an active movement. When this communication
object is activated, whether with "0" or "1", the active movement is stopped.

«
...
26
27
28
29
30
...
»

Summary of Contents for JAL-01UP.02





















































































Reviews:

No comments

Related manuals for JAL-01UP.02

Brand: ABB Pages: 63

Brand: Hama Pages: 7

Brand: Hama Pages: 44

Brand: RadioMaster Pages: 10

Brand: K&K Pages: 6

Brand: MacDon Pages: 32

Brand: K&K Pages: 6

Brand: UNICORECOMM Pages: 32

Brand: UNICORECOMM Pages: 7

Brand: UNICORECOMM Pages: 26

Brand: UNICORECOMM Pages: 25

Brand: M-system Pages: 3

Brand: Zaiput Flow Technologies Pages: 10

Brand: Paradox Pages: 6

Brand: 2gig Technologies Pages: 6

1020 CAN-RS232-RS422 MFL

Brand: PENKO Pages: 29

Brand: Hach Pages: 504

Brand: Bardiani Valvole Pages: 24

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands