MDT Technologies JAL-01UP.02 Technical Manual Download Page 42 | Manualshive

Page: 42 / 84

background image

Technical Manual Shutter Actuator JAL-0X10X.02

MDT technologies GmbH •

51766 Engelskirchen • Papiermühle 1

Tel.: +49-2263-

880 • Fax: +49

-2263-4588

• [email protected] • www.mdt.de

42

42

By activating the central objects in selected channels, it is possible to control several channels
simultaneously, via a single command.
The object 0, "Shutter Up / Down", is the central travel command and applies to both, blinds
channels as well as to shutter channels, in which the central objects have been activated.
Object 1, "slats adjustment / stop", is only relevant for blind channels in which the central objects
have been activated. It is used for manual slat adjustment and stops a running travel function of the
blind.
Object 2, "Stop", is the central stop command for all channels. Object 3, "absolute position", also
applies to shutters as well as blinds with central function enabled. By this command, absolute
elevation positions can be sent to the channels.
Object 4, "absolute slat position", is only relevant for blind channels in which the central objects have
been activated. With this command, absolute slat positions can be sent to the blind channels.

With the parameter settings you can specify which objects the channel should react to:



only Up

Channel reacts only to Up commands of object 0 and object 1 (for blinds).



only Down

Channel reacts only to Down commands of object 0 and object 1 (for blinds).



only Up/Down

Channel reacts to all commands of Object 0 and Object 1.



only absolute position

Channel reacts only to absolute commands via object 3 and object 4 (blind).



only absolute position and Up

Channel reacts only to absolute commands via object 3 and object 4 (blinds) and Up
commands of object 0 and object 1 (for blinds).



only absolute position and Down

Channel reacts only to absolute commands via object 3 and object 4 (blinds) and Down
commands of object 0 and object 1 (for blinds).



absolute position and Up/Down

channel reacts to all central commands.

«
...
40
41
42
43
44
...
»

Summary of Contents for JAL-01UP.02





















































































Reviews:

No comments

Related manuals for JAL-01UP.02

SmartSwitch 6000

Brand: Cabletron Systems Pages: 76

Brand: Eaton Pages: 2

Brand: Eaton Pages: 2

Brand: Eaton Pages: 8

Brand: Fagor Pages: 10

Brand: Fagor Pages: 358

Brand: Fagor Pages: 556

Brand: Fagor Pages: 172

Brand: Fagor Pages: 180

Brand: Fagor Pages: 112

Master Control Unit

Brand: FaderMate Pages: 36

Brand: Jedo Pages: 26

Brand: Faulhaber Pages: 66

Brand: Federal Signal Corporation Pages: 34

Brand: Samson Pages: 40

Brand: L. G. B. Pages: 2

Brand: L-Acoustics Pages: 36

Brand: Saftronics Pages: 13

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands