manualshive.com logo in svg

MDT Technologies JAL-01UP.02, Technical Manual

The MDT Technologies JAL-01UP.02 is an innovative device designed to revolutionize your technological experiences. Gain access to its full potential with the comprehensive Technical Manual, available for free download on our website. Unlock the product's true capabilities with this user-friendly manual, exclusively from manualshive.com.

Share
Download
background image

JAL-0410.02

JAL-0210.02

JAL-01UP.02

MDT Shutter Actuator

 MDT Shutter Actuator 2/4/8-fold, MDRC 

 MDT Shutter Actuator        1-fold, flush mounted   

Version

JAL-0210.02

Shutter Actuator 2-fold

2SU MDRC,  10A, shutter motors 230VAC up to 600W

JAL-0410.02

Shutter Actuator 4-fold

4SU MDRC, 10A, shutter motors 230VAC up to 600W

JAL-0810.02

Shutter Actuator 8-fold

8SU MDRC, 10A, shutter motors 230VAC up to 600W

JAL-0410D.02

Shutter Actuator 4-fold

4SU MDRC,   8A, shutter motors   24VDC up to 180W

JAL-0810D.02

Shutter Actuator 8-fold

8SU MDRC,   8A, shutter motors   24VDC up to 180W

JAL-01UP.02

Shutter Actuator 1-fold

Flush mounted, 6A, shutter motors 230VAC up to 300W

The MDT Shutter Actuator receives KNX/EIB telegrams and controls up to 8 independent shutter or sunblind drives. 
Each output uses two monostable relays. The MDRC shutter Actuators can be operated manually via a push button. 

The outputs are parameterized individually via ETS. The device provides extensive functions like status response, block 
functions, central function and positioning shutters, blinds and other hangings. Additionally the device provides up to 8 
scenes per channel. If the mains voltage fails, all outputs are switched off. After bus voltage failure or recovery the position 
of the shutter is selected in dependence on the parameterization. 

For 24VDC motors it is neccessary to use the JAL-0x10D.02 with commutator circuit.

The MRDC Shutter Actuators use a common power supply terminal for two channels. The flush mounted MDT Shutter 

 

Actuator has a common power supply terminal. This feature simplifies the wiring and increases clarity of the circuit.

The MDT Shutter Actuator is available as modular installation device and flush mounted device for fixed installation in dry 

rooms.

For project design and commissioning of the MDT Shutter Actuator it is recommended to use the ETS. 
Please download the application software at www.mdt.de/Downloads.html

•  Production in Germany, certified according to ISO 9001

•  Extensive function extension

•  Lockable manual operation and LED indicator for each channel
•  Operation mode blind/shutter
•  Travel-, pause-at-change-of-direction and step time adjustable

 

•  Separate travel time for up and down adjustable
•  Tip operation for accurate positioning
•  Extended 1Bit automatic positions and logical functions
•  1Byte absolute positioning for shutter and blinds
•  Alarm, central- and block functions
•  Behavior after alarms and block separately adjustable
•  Priority/forced operation with automatic release time

•  Ventilation function (window open/tilt)
•  Automatic sun protection with sun 
    position calculation (exclusive JAL-01UP.02)

•  Adjustable behavior in case of bus voltage failure or return

 

    (exclusive JAL-01UP.02 und JAL-0210.02)

•  Two contacts share one supply phase (MDRC device)
•  Common supply phase (UP device)
•  Quick application download (long frame support for ETS5)
•  3 years warranty

MDT technologies GmbH

 

•

 51766 Engelskirchen 

•

 Papiermühle 1 

Tel.: + 49 - 2263 - 880 

•

 

Fax: + 49 - 2263 - 4588 

•

 

[email protected] 

•

 www.mdt.de

Stand: 0217

DIN EN ISO 9001

TAW Cert

 

Zert.Nr.1905606

N

Summary of Contents for JAL-01UP.02





















































































Reviews:

No comments

Related manuals for JAL-01UP.02

Ickle Bubba Gravity Instructions For Use Manual preview
Gravity
Brand: Ickle Bubba Pages: 23
Jeep Liberty Instruction Sheet preview
Liberty
Brand: Jeep Pages: 32
Accel 300+ Installation Instructions Manual preview
300+
Brand: Accel Pages: 8
Watts 1717 Installation Instruction preview
1717
Brand: Watts Pages: 2
Hanbay RC Series Manual preview
RC Series
Brand: Hanbay Pages: 18
BabySafe LUCKY Instruction preview
LUCKY
Brand: BabySafe Pages: 24
Farfisa TD6100 Manual preview
TD6100
Brand: Farfisa Pages: 20
Racal Instruments 1266 Manual preview
1266
Brand: Racal Instruments Pages: 64
tams elektronik HELIOS Manual preview
HELIOS
Brand: tams elektronik Pages: 60
Sunnen HTA-2000 (2M) Manual preview
HTA-2000 (2M)
Brand: Sunnen Pages: 24
FUTABA FP-4NBF Instruction Manual preview
FP-4NBF
Brand: FUTABA Pages: 8
MaintTech CX300 User Manual preview
CX300
Brand: MaintTech Pages: 28
Varian Turbo-V 250 series Instruction Manual preview
Turbo-V 250 series
Brand: Varian Pages: 79
M-system R7M-DC16B Instruction Manual preview
R7M-DC16B
Brand: M-system Pages: 7
Mitsubishi A1SJ71LP21GE User Manual preview
A1SJ71LP21GE
Brand: Mitsubishi Pages: 16
C-TEC XFP502/X User Manual preview
XFP502/X
Brand: C-TEC Pages: 28
Swegon LUNA b T-CU Manual preview
LUNA b T-CU
Brand: Swegon Pages: 27
Nations N32G43 Series User Manual preview
N32G43 Series
Brand: Nations Pages: 654

Brands by name

Popular brands

Load more brands