Technical Manual Shutter Actuator JAL-0X10X.02
MDT technologies GmbH •
51766 Engelskirchen • Papiermühle
1
Tel.: +49-2263-
880 • Fax: +49
-2263-4588
• [email protected] • www.mdt.de
4
4
2 Overview
2.1 Overview devices
The manual refers to the following shutter actuators: (Order code printed in bold type):
JAL-01UP.02
Shutter Actuator 1-fold, 230VAC, 6A, flush-mounted fitting
o
1-fold, for shutter motors up to 300W
JAL-0210.02
Shutter Actuator 2-fold, 2TE MDRC, 230V AC, 10A
o
2-fold, for shutter motors up to 180W, manual actuation
JAL-0410.02
Shutter Actuator 4-fold, 4TE MRDC, 230V AC, 10A
o
4-fold, for shutter motors up to 600W, manual actuation
JAL-0810.02
Shutter Actuator 8-fold, 8TE MRDC, 230V AC, 10A
o
8-fold, for shutter motors up to 600W, manual actuation
JAL-0410D.02
Shutter Actuator 4-fold, 4TE MDRC, 24V DC, 8A
o
4-fold, for shutter motors up to 180W, manual actuation
JAL-0810D.02
Shutter Actuator 8-fold, 8TE MDRC, 24V DC, 8A
o
8-fold, for shutter motors up to 180W, manual actuation
2.1.1 Special functions of the Shutter actuator
The shutter actuator has a very extensive application with the following specific functions:
Integrated logic for window contacts with practical air function:
The actuator moves automatically to adjustable positions at "window tilted" and "window open".
For example, it is possible at "window tilted" and closed shutter to move to an air position of 90%.
Central telegrams can be blocked. When the window is closed, these telegrams can be made up later
or the previous position can be approached automatically.
Sun position calculation with automatic clouding/Slat adjustment**
The actuator calculates the current position of the sun, i.e. Azimuth (solar angle) and elevation (solar
altitude).
Additionally to time/date it requires information about the amount of solar radiation. This can be
one or two threshold values of a brightness sensor or global radiation sensor or one to three
brightness values from a weather station (for example, East, South and West)
With this information, depending on sun position and sun strenght, shutters can drive automatically
to two different clouding positions (only for Shutters).
With blinds, a clouding position can be approached and the slats can be adjusted automatically.
With manual control, the tracking is automatically deactivated. At any time, by sending an enable
signal (block absolute position) or by approaching the upper position it can be activated again.
**(not JAL-01UP.02)
