Technical Manual Shutter Actuator JAL-0X10X.02
MDT technologies GmbH •
51766 Engelskirchen • Papiermühle 1
Tel.: +49-2263-
880 • Fax: +49
-2263-4588
• [email protected] • www.mdt.de
71
71
Status automatic clouding
Two different objects can be displayed for the status of automatic clouding.
in Clouding status
Object reports a 1 when automatic clouding is activated.
in Standby status
Object reports a 1 when automatic clouding is ready. This occurs when the calculation of
azimuth and elevation was started by receiving time/date.
An up/down movement command at the channel deactivates the standby state of the
clouding. This is activated again with the position 0% or with a release on the object " Block
clouding".
The following settings are only available when the channel is configured as "blinds":
Clouding from brightness threshold
Setting from which brightness threshold the clouding should be activated.These thresholds refer to
the settings in the menu "Clouding basic setting
Start slat adjustment if elevation is less than
Setting of the elevation angle from which the slat adjustment is to be activated. Typically, all blinds
are designed in such a way that no sun enters the room at an elevation angle of 45 ° and a horizontal
slat.
Minimum change of slat adjustment
The minimum change of slat adjustment indicates the percentage in which the slats are tracked. At a
percentage of 5%, the slats are thus tracked in significantly smaller steps than with a percentage of
30%
Offset slat adjustment
The setting "Offset slat adjustment" causes the elevation angle to be increased or decreased
manually. This causes more or less shading.
positive offset
It is more shaded by the slat tracking
negative offset
It is less shaded by the slat tracking
Behavior after clouding
This behavior defines the action to be performed after clouding.
The following settings are only available when the channel is configured as "shutter":
Action at Brightness threshold 1/Position 1 Height
When this parameter is activated, the shutter approaches the height position which is set when the
brightness threshold 1 is exceeded.
These thresholds refer to the settings in the "Clouding basic setting"
Action at Brightness threshold 2/Position 2 Height
Action as previous item, now for threshold 2/height 2
