McDATA Sphereon 4500 User Manual Download Page 173

Page: 173 / 216

Product Manager Messages

A-13

Product Manager Messages

Message

File transfer aborted.

Description

User has stopped the file transfer.

Action

N/A. An informational message.

Message

File transfer is in progress.

Description

Firmware or data collection is being transferred.

Action

N/A. An informational message.

Message

Firmware download timed out.

Description

The switch did not respond in the time allowed. The status of the
firmware install operation is unknown.

Action

Retry the operation. If the problem persists, contact support
personnel.

Message

Firmware file I/O error.

Description

Firmware file input/output error occurred.

Action

Contact support personnel.

Message

Firmware file not found.

Description

Firmware file deleted from the EFC Server.

Action

Add firmware to library.

Summary of Contents for Sphereon 4500

























































































































































































































Search results

Summary of Contents for Sphereon 4500

Reviews:

Related manuals for Sphereon 4500

Brands by name

Popular brands

McDATA Sphereon 4500, User Manual

Search results

Summary of Contents for Sphereon 4500

Reviews:

Related manuals for Sphereon 4500

Brands by name

Popular brands