MCCORMICK X60 Series, Operator'S Manual, Page: 65 / 262

65
Instruments and Programming
4
Display MENU
The menu system for the cluster is operated by using the three buttons on the left-hand panel.
UP
DOWN
MENU
The menu system is divided into 2 parts:
1-Operating menu
Accessed by using the UP/DOWN arrows when the key is on.
2-Accessories Menu
Is shown automatically when the key is turned to the Accessory position.
1.1 Operating menu
When the ignition is on, either with or without the engine running the Working Menu can be cycled through by using the
UP and DOWN buttons.
After key-on the cluster will always default to the PTO/hours screen. As soon as Engine speed goes above 500 RPM for
more than 2 seconds, the display will show the last selected working menu option before previous key off.
The diagram below shows the menu path when using the DOWN button, if UP is pushed the direction is reversed.
NOTE: Count of worked area is active only if the engine is running and implement width is set on a value different from “0”.
1) Power take-off / hours
2) Worked area
3) Distance
4) Calibration
5) Work timer
6) Vehicle errors - if active