MCCORMICK X60 Series, Operator'S Manual

Page: 183 / 262

181
Maintenance
7
10 HOURS OR DAILY SERVICE
Drain Fuel/Water Separator
Regularly drain off the water that collects from the
cock of the water/fuel separator filter (1).
Mechanical engine
During running-in, replace the fuel filters after
the first 50 work hours. Afterwards, replace the
fuel filters after every 500 hours service.
The drain plug is located on the bottom of the fuel filter.
Loosen the plug to let any water or sediment drain from
the filter. Tighten the plug after the water has drained.
Electronic engine
The drain plug is located on the bottom of the fuel
separator filter. Loosen the plug to let any water or
sediment drain from the filter. Tighten the plug after the
water has drained.
IMPORTANT: Dispose of fuel and filters in accordance
with local regulations. DO NOT drain on the ground, into
a drain or into a leaky container. Be responsible for the
environment.
Shift the gear to neutral and engage the parking brake.
WARNING: Always use specific personal safety devices
for each operation. Beware of burns caused by hot
water and hot motor parts.
[4.1.n]
WARNING: To open the bonnet, follow the procedure
indicated under “How to open the bonnet”.