MCCORMICK X60 Series, Operator'S Manual, Page: 54 / 262

54
Controls - Cab
CONTROLS ON LOWER RIGHT-
HAND PANEL
1. ACCELERATOR LEVER - To increase or reduce engine
speed rate.
2.XTRASHIFT CONTROL - It controls the engagement of
POWERSHIFT ranges (only available in forward speeds).
3. GEARSHIFT LEVER
4. RANGE SHIFT LEVER (and CREEPER LEVER, if
equipped)
5. AUXILIARY CONTROL VALVE LEVERS
6. LEVER LOCKING DEVICE
7. ASHTRAY
8. Not used.
9. FRONT FIELD LIGHTS ON ROOF AND HANDGRIPS
(if provided).
10. REAR FIELD LIGHTS ON ROOF AND MUDGUARDS
(if equipped)
1. UP/DOWN SWITCH, HITCH
2. FOUR-WHEEL DRIVE (if equipped)
3. DIFFERENTIAL LOCK SWITCH
NOTE: NEVER use four-wheel drive for light work or
when driving the tractor on public roads.
WARNING: Tractors equipped with four-wheel
drive (4WD) have a better drive and can cope
with steeper slopes. Stay off slopes too steep
for safe operation. To avoid tractor overturn-
ing, drive up steep slopes in reverse gear.
4. SWITCH FOR SHOCK ABSORBER CONTROL (if pro-
vided).
5. FRONT PTO CONTROL SWITCH (optional)
6.
ELECTROHYDRAULIC REAR PTO CLUTCH
SWITCH
- ENGAGEMENT - Lift the locking collar on the PTO ON/
OFF switch and pull the switch up to the ON position to
engage the PTO. Now the switch will remain on the ON
position, while the PTO indicator light on the instrument
panel lights up.
- DISENGAGEMENT - Push the ON/OFF switch fully down.
The PTO indicator light on the instrument panel goes off.
NOTE: The engine can be started only if the PTO en-
gagement switch is in the OFF position.
7. IMPLEMENT WORK DEPTH/HEIGHT CONTROL.
8. FUNCTION SELECTOR KNOB (POSITION-DRAFT-
INTERMIX)
9. FRONT WINDSCREEN WASHER
10. FRONT WINDSCREEN WIPER
11. DIAGNOSTIC RECEPTACLE
12. QUICK DIG-IN SWITCH
13. FRONT LOADER CONTROL LEVER (if provided)
Refer to the loader manual or to your dealer for informa-
tion about correct use of the loader.
CONTROLS ON RIGHT-HAND PANEL