MCCORMICK X60 Series, Operator'S Manual

Page: 46 / 262

46
Controls - Cab
Seat Belt
WARNING: Always securely fasten your safety
belt. Your tractor is equipped with a ROPS
cab for your protection. The seat belt can
help insure your safety if it is properly used
and maintained. Never wear the belt in a
twisted condition or pinched between the seat
structural members.
Adjust the seat to your requirements.
Lean with your back straight against the back rest. Pull the
seat belt completely across your body and push the metal
eye (1) into the latch assembly (2) until it locks.
Adjust the position of the seat belt as low on your body
as possible.
To release the seat belt, push the red button (3) on the
latch assembly.
IMPORTANT: From time to time, carefully inspect the
seat belt and replace it if worn or damaged.
1
2
3
Mechanical suspension seat
(if equipped)
1. FORE/AFT ADJUSTMENT CONTROL - Lift lever and
adjust seat as required, release lever to lock in position.
2. HEIGHT ADJUSTMENT CONTROL - Grasp the seat and
lift it to the required height. To lower it, raise the seat and
move it beyond the upper end stop, then lower to the
required height.
3. WEIGHT ADJUSTMENT CONTROL - Without the
operator in the seat, turn the knob as required, until the
operator's weight is displayed in the indicator.
WARNING: To avoid injuries, the operator's
weight setting should be checked and ad-
justed to the operator before starting the
tractor.