MCCORMICK X60 Series, Operator'S Manual

Page: 226 / 262

224
Maintenance
GENERAL MAINTENANCE
Viscous fan drive
WARNING: Always use specific personal safety devices
for each operation. Beware of burns caused by hot
tractor parts.
During cleaning and maintenance of the engine and
radiator, be careful not to cause damage to the viscous
fan drive.
DO NOT restrict the fan blade rotation during engine
operation.
DO NOT remove the bi-metal coil (1) on the front of the
drive.
Check the fan and drive for external damage or erratic
operation. See your dealer if service is required.
Clean the operator's seat
Before removing stains, use a vacuum cleaner to remove
loose dirt.
Find what type and how old the stains are. Some stains
can be removed with water or soap solution.
CLEANER FLUID - This type of cleaner can be used for
grease or oil stains, follow manufactures instructions.
FOAM CLEANER: This type of cleaner is good for all stains,
follow manufactures instructions.
WARNING: Never use petroleum spirit, naptha
or any other volatile material for any clean-
ing purposes. These materials may be toxic
and/or flammable.
NOTE: Do not make the material wet or clean with a hard
brush. Clean with a damp cloth only. Immediately after the
material is clean, dry the material with dry cloth.
Inspection and maintenance of
safety belts (if equipped).
WARNING: Securely fasten your seat belt. Your
tractor is equipped with a ROPS cab or frame
for your protection. The seat belt can help in-
sure your safety if it is used and maintained.
Never wear a seat belt loosely or with slack
in the belt system. Never wear the belt in a
twisted condition or pinched between the seat
structural members.
WARNING: Always use specific personal safety devices
for each operation.
- Keep sharp edges and items that can cause damage,
away from the belt.
- From time to time, check belt, buckles and mounting
bolts for damage.
- Replace all parts that are worn or damaged.
- Replace a belt that has cuts that can weaken the belt.
- Check that the bolts are tight on the seat bracket.
- Keep seat belt clean and dry.
- Clean belt only with a soap solution and warm water.
- Do not use bleach or dye on the belt because this can
make the belt weak