McAfee VIRUSSCAN 4.5 -, Administrator'S Manual

Page: 162 / 208

Using VirusScan Command-line Options
162 McAfee VirusScan Anti-Virus Software
/REPORT <filename> On-demand
scanning only Creates a report of infected files and system
errors, and saves the data to <filename> in ASCII
text file format.
If <filename> already exists, /REPORT will
overwrite it. To avoid overwriting, use the
/APPEND option with /REPORT: The scanner will
instead add report information to the end of the file,
instead of overwriting it.
You can also use /RPTALL, /RPTCOR, and
/RPTERR to add scanned files, corrupted files,
modified files, and system errors to the report.
You can include the destination drive and directory
(such as D:\VSREPRT\ALL.TXT), but if the
destination is a network drive, you must have
rights to create and delete files on that drive.
McAfee recommends omitting /PAUSE when using
any report option.
/RPTALL On-demand
scanning only Include all scanned files in the /REPORT file.
When used with /REPORT, this option adds the
names of corrupted files to the report file.
McAfee recommends omitting /PAUSE when using
any report option.
/RPTERR On-demand
scanning only Include errors in /REPORT file.
When used with /REPORT, this option adds a list
of system errors to the report file.
/LOCK is appropriate in highly vulnerable network
environments, such as open-use computer labs.
System errors can include problems reading or
writing to a disk or hard disk, file system or network
problems, problems creating reports, and other
system-related problems.
McAfee recommends omitting /PAUSE when using
any report option.
/SAVE On-access
scanning only Saves the command-line options to the
VSHIELD.INI file.
Table C-1. VirusScan command-line scanner options