McAfee MAP-3300-SWG - Web Security Appliance 3300, Product Manual

Page: 303 / 336

Table 308 Option definitions
Option Definition
User ID This is scmadmin. You can add more users later.
Password Specifies the new password. Change the password as soon as possible to keep your
appliance secure.
You must enter the new password twice to confirm it. The original default password is
scmchangeme.
Summary — Custom setup
Use this page when using the Custom Setup Wizard, to review a summary of the settings that you
have made for the network connections and scanning of the network traffic.
To change any value, click its blue link to display the page where you originally typed the value.
After you click
Finish
, the setup wizard has completed.
Use the IP address shown here to access the interface. For example https://192.168.200.10. Note
that the address begins with https, not http.
When you first log onto the interface, type the user name,
scmadmin
and the password that you gave to
this setup wizard.
Table 309 Option definitions
Option Definition
The value is set according to best practice.
The value is probably not correct. Although the value is valid, it is not set according to best
practice. Check the value before continuing.
No value has been set. The value has not been changed from the default. Check the value
before continuing.
ePO Managed Setup
Use the ePO Managed Setup wizard to configure your appliance so that it can be managed from your
ePolicy Orchestrator server.
The ePO Managed Setup wizard consists of the following pages:
• Settings for ePO Management on page 304
• Traffic — Standard setup on page 288
• Basic Settings - Standard setup on page 288
• Network Settings on page 292
• Cluster Management on page 293
• Password on page 296
• Summary — Standard setup on page 290
Contents
Settings for ePO Management
Basic Settings -- ePO Managed Setup
Network Settings
Cluster Management
DNS and Routing
Overview of System features
Setup Wizard
McAfee Email and Web Security Appliances 5.6.0 Product Guide 303