McAfee MAP-3300-SWG - Web Security Appliance 3300, Product Manual

Page: 299 / 336

Web
|
Web Configuration
Email
|
Email Configuration
|
Protocol Configuration
|
Connection Settings (SMTP)
Email
|
Email Configuration
|
Protocol Configuration
|
Connection Settings (POP3)
Basic Settings - Custom setup
Use this page when selecting the Custom Setup Wizard, to specify basic settings for the appliance in
transparent bridge mode.
The appliance tries to provide some information for you, and shows the information highlighted in
amber. To change the information, click and retype.
Table 301 Basic settings Option definitions
Option Definition
Cluster Mode
•
Off
— This is a standard appliance.
•
Cluster Scanner
— The appliance receives its scanning workload from a master appliance.
•
Cluster Master
— The appliance controls the scanning workload for several other
appliances.
•
Cluster Failover
— If the master fails, this appliance controls the scanning workload
instead.
Device name Specifies a name, such as appliance1.
Domain name Specifies a name, such as domain1.com.
Default Gateway
Specifies an IPv4 address, such as 198.168.10.1. You can test later that the appliance
can communicate with this server.
Next hop router Specifies an IPv6 address, such as FD4A:A1B2:C3D4::1.
Cluster Management
Use this page to specify cluster management balancing requirements.
Depending on the cluster mode you selected on the
Basic Settings
page, the text that appears on the
Cluster Management
page changes.
When configuring a group of appliances or McAfee Content Security Blade Servers, the current master
uses a "least used" algorithm to assign connections to the appliances or blades configured to scan
traffic. The scanning appliance or blade that is currently showing the least number of connections, at
that moment in time, is assigned the next connection.
For a cluster of appliances:
Overview of System features
Setup Wizard
McAfee Email and Web Security Appliances 5.6.0 Product Guide 299