McAfee MAP-3300-SWG - Web Security Appliance 3300 Product Manual Download

Page: 221 / 336

Select

New Client

In Client Address, type the IP address of the client that you wish to allow queries from.

Note the information in the Username and Password fields; you will need them later to enter into
the client machine.

Select

Task — Set up a client appliance to monitor a UPS on another appliance

Complete the steps in Configure your appliance to accept UPS status requests from other
appliances.

Go to

System

Appliance Management

UPS Settings

Click

Enable UPS support

, and click

New Device

Select

Get Power status from another EWS appliance

and click

Next

Type in the name or IP address of the appliance that has the UPS connected to it.

Add the username and password displayed that you made a note of in Configure your appliance to
accept UPS status requests from other appliances.

Click

Test Authentication

to check that the communication is working, then click

Finish

and apply changes.

Add UPS Device

Use this wizard to select the type of UPS device that you want to add, and specify its details.

System

Appliance Management

UPS Settings

New Device

Introduction to the Add UPS Device wizard

The options you see in the wizard depend on the type of device that you choose. On the

UPS Device

Connection

screen, choose from:

•

USB device

(this option is unavailable until you add a USB device)

•

Serial device

•

Get power status from another EWS appliance

Table 212 Option definitions — USB Device Details screen

Option

Definition

Vendor name

Lists supported vendors

UPS device model

Select from the list of supported USB models supplied by the vendor you chose

Attached USB device

Details of the USB device.

Off delay

The length of time, in seconds, that the UPS waits before turning off the UPS after

it receives the "turn off" command

On delay

The length of time, in seconds, that the UPS waits before restoring power after the

mains power returns

Overview of System features

Appliance Management

McAfee Email and Web Security Appliances 5.6.0 Product Guide

221

Summary of Contents for MAP-3300-SWG - Web Security Appliance 3300

















































































































































































































































































































































Search results

Summary of Contents for MAP-3300-SWG - Web Security Appliance 3300

Reviews:

Related manuals for MAP-3300-SWG - Web Security Appliance 3300

Brands by name

Popular brands

McAfee MAP-3300-SWG - Web Security Appliance 3300, Product Manual

Search results

Summary of Contents for MAP-3300-SWG - Web Security Appliance 3300

Reviews:

Related manuals for MAP-3300-SWG - Web Security Appliance 3300

Brands by name

Popular brands