15
THE PRESENT MANUAL IS PROPERTY OF THE MANUFACTURER. ANY REPRODUCTION, EVEN PARTIAL, IS PROHIBITED.
- 15 -
ROUTINE MAINTENANCE
4.
Troubleshooting
Whenever the appliance does not work properly, try to solve the less serious problems using
this table.
FAULT
POSSIBLE CAUSE
INTERVENTION
The appliance does not turn on.
•
The master switch is not con-
nected.
•
The residual current device
or circuit breaker has tripped.
•
Connect the master switch.
•
Restore the residual current
device or circuit breaker.
Water does not reach the pasta
cooker tank.
•
The waterworks gate valve is
shut.
•
Open the waterworks gate
valve.
Water does not drain from the
cooking compartment.
•
The drain is clogged.
•
Clean the drain filter.
•
Free the drain from residues.
The inner walls of the tank are
covered with limestone.
The water is too hard; the
softener is finished.
•
Connect the appliance to a
water softener.
•
Regenerate the water sof-
tener.
•
Descale the cooking com-
partment.
The cooking compartment is
stained.
•
Quality of the water.
•
Ineffective detergent.
•
Insufficient rinsing.
•
Filter the water (see water sof-
tener).
•
Use the recommended deter-
gent.
•
Rinse once again.
The gas appliance does not turn
on.
•
Gas valve shut.
•
Air inside pipes.
•
Open the gas valve.
•
Repeat the ignition opera-
tions.
The light indicators do not turn
on.
•
The master switch is not con-
nected.
•
The residual current device
or circuit breaker has tripped.
•
Connect the master switch.
•
Restore the residual current
device or circuit breaker.
If the problem cannot be resolved, turn the appliance off and shut all the supply valves. Then
contact customer service.
