Mazda 2009 CX-7 Manual Download Page 234

Page: 234 / 454

Black plate (234,1)

Air intake selector

Outside or recirculated air positions can
be selected. Press the switch to select
outside/recirculated air positions.

Recirculated air position (indicator
light illuminated)

Use this position when going through
tunnels, driving in congested traffic (high
engine exhaust areas) or when quick
cooling is desired.

Outside air position (indicator light
turned off)

Use this position for normal conditions
and defogging.

WARNING

Do not use the

position in cold or

rainy weather:

Using the

position in cold or

rainy weather is dangerous as it will
cause the windows to fog up. Your
vision will be hampered, which could
lead to a serious accident.

AMB (Ambient Temperature) switch

Press the AMB switch to display the
ambient temperature.

NOTE

The displayed ambient temperature may
vary from the actual ambient temperature
depending on the surrounding area and
vehicle conditions.

Press the AMB switch 3 seconds or more to
switch the display from Fahrenheit to
Centigrade or vice versa.

Press the AMB switch again to switch the
display from ambient temperature to the
temperature set for the air conditioner.

Windshield defroster switch

Press the switch to defrost the windshield
and front door windows.

Operation of Automatic Air
Conditioning

1. Press the AUTO switch. Selection of

the airflow mode, air intake selector
and amount of airflow will be
automatically controlled.

6-12

Interior Comfort

Climate Control System

CX-7_8Z60-EA-08D_Edition2 Page234
Friday, May 30 2008 5:27 PM

Form No.8Z60-EA-08D

Summary of Contents for 2009 CX-7







































































































































































































































































































































































































































































Search results

Summary of Contents for 2009 CX-7

Reviews:

Related manuals for 2009 CX-7

Brands by name

Popular brands

Mazda 2009 CX-7, Manual

Search results

Summary of Contents for 2009 CX-7

Reviews:

Related manuals for 2009 CX-7

Brands by name

Popular brands