Mazda 2009 CX-7 Manual Download Page 301

Page: 301 / 454

Black plate (301,1)

7. The voice guidance reads out the voice

input command number (refer to the
voice input command list for voice
recognition learning). (Ex.

“

Please read

phrase 1

”

)

8. Say: [Beep]

“

0123456789

”

(Say the

voice input command for voice
recognition learning (1 to 8) according
to the voice guidance.)

9. Prompt:

“

Speaker enrollment is

complete, returning to main menu.

”

NOTE

If an error occurred in the voice recognition
learning, re-learning can be done by pressing
the talk button (Short press).

Voice input command list for voice
recognition learning

When reading out, the following points
must be observed:

Read out the numbers one at a time
correctly and naturally.

(For example,

“

1234

”

must be read out

“

one, two, three, four

”

, not

“

twelve, thirty

four

”

Do not read out parentheses.

“

(

”

and

hyphens

“

”

are used for separating

numbers in a phone number.

Ex.

“

(888) 555-1212

”

must be spoken

“

Eight,

eight, eight, five, five, five, one, two, one,
two.

”

Phrase

Command

0123456789

(888) 555-1212

Call

Dial

Setup

Cancel

Continue

Help

NOTE

After user voice registration is completed,
voice guidance

“

Speaker enrollment is

complete, returning to main menu

”

announced.

Voice recognition learning on/off

1. Activate Bluetooth Hands-Free (page

6-65).

Say

: [Beep]

“

Voice training

”

Prompt

“

Enrollment is enabled/

disable. Would you like to disable/
enable or retrain?

”

Say

: [Beep]

“

Disable

”

“

Enable

”

5. When

“

Disable

”

is spoken, the voice

recognition learning is turned off.
When

“

Enable

”

is spoken, the voice

recognition learning is turned on.

Prompt

“

Speaker Enrollment is

disabled/enabled, returning to main
menu.

”

Interior Comfort

Bluetooth Hands-Free

6-79

CX-7_8Z60-EA-08D_Edition2 Page301
Friday, May 30 2008 5:28 PM

Form No.8Z60-EA-08D

Summary of Contents for 2009 CX-7







































































































































































































































































































































































































































































Search results

Summary of Contents for 2009 CX-7

Reviews:

Related manuals for 2009 CX-7

Brands by name

Popular brands

Mazda 2009 CX-7, Manual

Search results

Summary of Contents for 2009 CX-7

Reviews:

Related manuals for 2009 CX-7

Brands by name

Popular brands