Mazda 2009 CX-7 Manual Download Page 158

Page: 158 / 454

Black plate (158,1)

3. Release the parking brake (also the foot brake) and pull away from the wheel blocks.

Stop; apply the parking brake and shift into P.

4. Have a helper retrieve the wheel blocks.

Fuel consumption

Trailer towing causes higher fuel consumption.

Maintenance

If you tow a trailer frequently, have your vehicle serviced as shown in Scheduled
Maintenance (page 8-3).

4-20

Before Driving Your Mazda

Towing

CX-7_8Z60-EA-08D_Edition2 Page158
Friday, May 30 2008 5:27 PM

Form No.8Z60-EA-08D

Summary of Contents for 2009 CX-7







































































































































































































































































































































































































































































Search results

Summary of Contents for 2009 CX-7

Reviews:

Related manuals for 2009 CX-7

Brands by name

Popular brands

Mazda 2009 CX-7, Manual

Search results

Summary of Contents for 2009 CX-7

Reviews:

Related manuals for 2009 CX-7

Brands by name

Popular brands