Mazda 2009 CX-7 Manual Download

Page: 250 / 454

Black plate (250,1)

Select the desired ALC mode.

Mode

Volume change

No change

Minimum

Medium

Maximum

Turn the audio control dial to select ALC
OFF or ALC LEVEL1

―

3 modes. The

selected mode will be indicated.

AUDIOPILOT

(Bose

Sound

System-equipped model)

AUDIOPILOT

automatically adjusts

audio volume and sound quality in
accordance with the level of noise
entering the vehicle interior while driving.
When AUDIOPILOT

is turned ON, the

system automatically calculates the
conditions for optimum hearing of sound
which may be difficult to hear depending
on exterior noise.

* AUDIOPILOT

is a registered

trademark of Bose Corporation.

Centerpoint

(Bose

Sound System-

equipped model)

Centerpoint

offers you the experience of

5.1-channel surround sound in your
vehicle even with your conventional 2-
channel stereo CDs.
The true surround sound effect of
Centerpoint

can be adjusted to any one

of five level between minimum and
maximum enhancement.

Indication

Enhance level

Minimum

Low

Medium

High

Maximum

1. Turn the audio control dial and select

CenterPT ON.

2. Press the audio control dial and select

the surround effect mode.

3. Turn the audio control dial to select

CenterPT MIN

―

MAX mode. The

selected mode will be indicated.

6-28

Interior Comfort

Audio System

CX-7_8Z60-EA-08D_Edition2 Page250
Friday, May 30 2008 5:28 PM

Form No.8Z60-EA-08D

Summary of Contents for 2009 CX-7







































































































































































































































































































































































































































































Search results

Summary of Contents for 2009 CX-7

Reviews:

Related manuals for 2009 CX-7

Brands by name

Popular brands

Mazda 2009 CX-7, Manual

Search results

Summary of Contents for 2009 CX-7

Reviews:

Related manuals for 2009 CX-7

Brands by name

Popular brands