Mazda 2009 CX-7 Manual Download Page 248

Page: 248 / 454

Black plate (248,1)

Power/Volume/Sound Controls

Power/Volume dial

Audio control dial

Power ON/OFF

Turn the ignition switch to the ACC or
ON position.

Press the power/volume dial to turn the
audio system on.
Press the power/volume dial again to turn
the audio system off.

NOTE

To prevent the battery from being discharged,
do not leave the audio system on for a long
period of time when the engine is not running.

Volume adjustment

To adjust the volume, turn the power/
volume dial.

Turn the power/volume dial to the right to
increase volume, to the left to decrease it.

Audio sound adjustment

1. Press the audio control dial to select the

function. The selected function will be
indicated.

Depending on the mode selected, the
indication changes.

Standard audio-
equipped model

6-26

Interior Comfort

Audio System

CX-7_8Z60-EA-08D_Edition2 Page248
Friday, May 30 2008 5:28 PM

Form No.8Z60-EA-08D

Summary of Contents for 2009 CX-7







































































































































































































































































































































































































































































Search results

Summary of Contents for 2009 CX-7

Reviews:

Related manuals for 2009 CX-7

Brands by name

Popular brands

Mazda 2009 CX-7, Manual

Search results

Summary of Contents for 2009 CX-7

Reviews:

Related manuals for 2009 CX-7

Brands by name

Popular brands