Mazda 2009 CX-7 Manual Download | Manualshive

Page: 151 / 454

background image

Black plate (151,1)

Trailer Towing

Your Mazda was designed and built primarily to carry passengers and cargo.
If you tow a trailer, follow these instructions because driver and passenger safety depends
on proper equipment and safe driving habits. Towing a trailer will affect handling, braking,
durability, performance, and economy.
Never overload vehicle or trailer. Consult an Authorized Mazda Dealer if you need further
details.

CAUTION

Don't tow a trailer during the first 1,000 km (600 miles) of your new Mazda. If you
do, you may damage the engine, transaxle, differential, wheel bearings, and other
power train components.

q

Weight Limits

TTW and GCWR

The total trailer weight (TTW), gross combination weight rating (GCWR), gross axle
weight rating (GAWR), trailer load, and trailer tongue load must be within the
prescribed limits.

l

The total trailer weight (TTW) is the sum of the weights of the trailer load (trailer
weight plus cargo), trailer hitch, vehicle passengers, and vehicle load. Never allow
the total trailer weight (TTW) to exceed specifications in the Trailer Towing-Load
Table.

l

The maximum GCWR is the combination weight of the trailer and load plus the
towing vehicle (including trailer hitch, vehicle passengers, and load). It must not
exceed specifications in the load table.

GAWR and GVWR

Don't exceed front and rear GAWR (gross axle weight rating) and GVWR (gross vehicle
weight rating). If you do, vehicle handling, braking, and performance will be affected.
These values are also on the Motor Vehicle Safety Certification Label posted on the driver's
door frame.

High-altitude operation

In a high-altitude operating environment, a gasoline engine loses power at a rate of 3% to
4% per 304 m (1,000 ft) of elevation. In these conditions, a reduction in gross vehicle
weight and gross combination weight is recommended.

Before Driving Your Mazda

Towing

4-13

CX-7_8Z60-EA-08D_Edition2 Page151
Friday, May 30 2008 5:27 PM

Form No.8Z60-EA-08D

«
...
149
150
151
152
153
...
»

Summary of Contents for 2009 CX-7







































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2009 CX-7

Brand: Jeep Pages: 12

Brand: Jeep Pages: 6

Brand: Warrior Products Pages: 3

Brand: GOgroove Pages: 9

Brand: Camcar Pages: 2

Brand: Mitsubishi Pages: 160

Brand: Cadillac Pages: 442

Brand: Romik Pages: 6

Brand: Yakima Pages: 13

Brand: Menabo Pages: 11

Brand: Renault Pages: 238

Brand: Oldsmobile Pages: 2

Brand: STARLANE Pages: 24

Brand: Paser Pages: 2

Brand: Xblitz Pages: 56

Brand: Demco Pages: 4

Brand: OHIOSTEEL Pages: 2

Brand: Navman Pages: 10

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands