Mazda 2009 CX-7 Manual Download Page 126

Page: 126 / 454

Black plate (126,1)

Sunshade

The sunshade can be opened and closed
by hand.

The sunshade opens automatically when
the moonroof is opened, but must be
closed by hand.

Sunshade

CAUTION

The sunshade does not tilt. To
avoid damaging the sunshade, do
not push up on it.

Do not close the sunshade while
the moonroof is opening. Trying to
force the sunshade closed could
damage it.

3-48

Knowing Your Mazda

Doors and Locks

CX-7_8Z60-EA-08D_Edition2 Page126
Friday, May 30 2008 5:27 PM

Form No.8Z60-EA-08D

Summary of Contents for 2009 CX-7







































































































































































































































































































































































































































































Search results

Summary of Contents for 2009 CX-7

Reviews:

Related manuals for 2009 CX-7

Brands by name

Popular brands

Mazda 2009 CX-7, Manual

Search results

Summary of Contents for 2009 CX-7

Reviews:

Related manuals for 2009 CX-7

Brands by name

Popular brands