Mazda 2009 CX-7 Manual Download Page 380

Page: 380 / 454

Black plate (380,1)

High-mount brake light, Side turn
signal lights

Due to the complexity and difficulty of
the procedure, the LED bulbs should be
replaced by an Authorized Mazda Dealer.

NOTE

LED bulb replacement is not possible. The
rear combination component must be replaced.

License plate lights

1. Wrap a flathead screwdriver with a soft

cloth to prevent damage to the lens and
remove the lens by carefully prying on
the edge of the lens with a flathead
screwdriver.

2. Disconnect the bulb by pulling it out.

3. Install the new bulb in the reverse order

of removal.

Replacing Interior Light Bulbs

Overhead light/Map lights (Front)

Due to the complexity and difficulty of
the procedure, the bulbs should be
replaced by an Authorized Mazda Dealer.

Overhead light (Rear), Luggage
compartment light

1. Wrap a small flathead screwdriver with

a soft cloth to prevent damage to the
lens and remove the lens by carefully
prying on the edge of the lens with the
flathead screwdriver.

2. Disconnect the bulb by pulling it out.

3. Install the new bulb in the reverse order

of removal.

8-44

Maintenance and Care

Some models.

Owner Maintenance

CX-7_8Z60-EA-08D_Edition2 Page380
Friday, May 30 2008 5:29 PM

Form No.8Z60-EA-08D

Summary of Contents for 2009 CX-7







































































































































































































































































































































































































































































Search results

Summary of Contents for 2009 CX-7

Reviews:

Related manuals for 2009 CX-7

Brands by name

Popular brands

Mazda 2009 CX-7, Manual

Search results

Summary of Contents for 2009 CX-7

Reviews:

Related manuals for 2009 CX-7

Brands by name

Popular brands