manualshive.com logo in svg

Mazda 2009 CX-7, Manual

Looking for a free manual to guide you through your Mazda 2009 CX-7? Look no further! At manualshive.com, you can easily download the user manual for your Mazda 2009 CX-7, helping you explore and maximize the features of this exceptional vehicle. Take advantage of this valuable resource now!

Share
Download
background image

Black plate (169,1)

q

Transaxle Ranges

The shift lever must be in P or N to
operate the starter.

P (Park)

P locks the transaxle and prevents the
front wheels from rotating.

WARNING

Always set the shift lever to P and set
the parking brake:

Only setting the shift lever to the P
position without using the parking
brake to hold the vehicle is
dangerous. If P fails to hold, the
vehicle could move and cause an
accident.

CAUTION

Ø

Shifting into P, N or R while the
vehicle is moving can damage
your transaxle.

Ø

Shifting into a driving gear or
reverse when the engine is running
faster than idle can damage the
transaxle.

R (Reverse)

In position R, the vehicle moves only
backward. You must be at a complete stop
before shifting to or from R, except under
rare circumstances as explained in
Rocking the Vehicle (page 4-8).

N (Neutral)

In N, the wheels and transaxle are not
locked. The vehicle will roll freely even
on the slightest incline unless the parking
brake or brakes are on.

WARNING

If the engine is running faster than idle,
do not shift from N or P into a driving
gear:

It's dangerous to shift from N or P
into a driving gear when the engine
is running faster than idle. If this is
done, the vehicle could move
suddenly, causing an accident or
serious injury.

Do not shift into N when driving the
vehicle:

Shifting into N while driving is
dangerous. Engine braking cannot be
applied when decelerating which
could lead to an accident or serious
injury.

CAUTION

Do not shift into N when driving the
vehicle. Doing so can cause transaxle
damage.

NOTE

Apply the parking brake or depress the brake
pedal before moving the shift lever from N to
prevent the vehicle from moving unexpectedly.

D (Drive)

D is the normal driving position. From a
stop, the transaxle will automatically shift
through a 6-gear sequence.

M (Manual)

M is the manual shift mode position.
Gears can be shifted up or down by
operating the shift lever.
Refer to Manual Shift Mode (page 5-12).

Driving Your Mazda

Starting and Driving

5-11

CX-7_8Z60-EA-08D_Edition2 Page169
Friday, May 30 2008 5:27 PM

Form No.8Z60-EA-08D

Summary of Contents for 2009 CX-7







































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2009 CX-7

Wagan 2591 User Manual preview
2591
Brand: Wagan Pages: 12
Yamaha Yamaha Rhino 660 Instruction Supplement preview
Yamaha Rhino 660
Brand: Yamaha Pages: 3
AC Schnitzer X3 M-Technik Fitting Instructions Manual preview
X3 M-Technik
Brand: AC Schnitzer Pages: 20
Gator HUDGPS1 Quick Start Manual preview
HUDGPS1
Brand: Gator Pages: 2
Mercedes-Benz 2016 SLK Operator'S Manual preview
2016 SLK
Brand: Mercedes-Benz Pages: 358
Dodge Challenger 2013 Owner'S Manual preview
Challenger 2013
Brand: Dodge Pages: 543
Zap XEBRA ZAPCAR Series Owner'S Manual preview
XEBRA ZAPCAR Series
Brand: Zap Pages: 16
Flash Cover MN019 Instructions preview
MN019
Brand: Flash Cover Pages: 2
Porsche WTY 2010 Warranty & Maintenance Manual preview
WTY 2010
Brand: Porsche Pages: 98
v.link NAL-PC-HSD Manual preview
NAL-PC-HSD
Brand: v.link Pages: 21
RBO IT FITS RBO1018 Product Manual preview
IT FITS RBO1018
Brand: RBO Pages: 36
Roadmaster Even Brake 9400 Owner'S Manual preview
Even Brake 9400
Brand: Roadmaster Pages: 20
Quadratec 506-Rock Quick Start Quide preview
506-Rock
Brand: Quadratec Pages: 2
Menabo 171071 Fitting Instructions preview
171071
Brand: Menabo Pages: 4
Audi Q7 V12 TDI QUATTRO - Brochure preview
Q7 V12 TDI QUATTRO -
Brand: Audi Pages: 20
BENDIX C-5 CUT OUT COCK Manual preview
C-5 CUT OUT COCK
Brand: BENDIX Pages: 2
Metra Electronics 99-8206 Installation Instructions Manual preview
99-8206
Brand: Metra Electronics Pages: 12
v.link VL2-CONCERT Manual preview
VL2-CONCERT
Brand: v.link Pages: 20

Brands by name

Popular brands

Load more brands