Mazda 2009 CX-7 Manual Download Page 430

Page: 430 / 454

Black plate (430,1)

GAWR (Gross Axle Weight Rating)

is the maximum allowable weight that can be carried

by a single axle (front or rear).

These numbers are shown on the Safety Compliance

Certification Label located on the driver's door frame or door pillar. The total load on
each axle must never exceed its GAWR.

GVW

GVW (Gross Vehicle Weight)

is the Vehicle Curb cargo + passengers.

GVWR (Gross Vehicle Weight Rating)

is the maximum allowable weight of the fully

loaded vehicle (including all options, equipment, passengers and cargo).

The GVWR is

shown on the Safety Compliance Certification Label located on the driver's door
frame or door pillar. The GVW must never exceed the GVWR.

9-38

Customer Information and Reporting Safety Defects

Tire Information (except Canada)

CX-7_8Z60-EA-08D_Edition2 Page430
Friday, May 30 2008 5:29 PM

Form No.8Z60-EA-08D

Summary of Contents for 2009 CX-7







































































































































































































































































































































































































































































Search results

Summary of Contents for 2009 CX-7

Reviews:

Related manuals for 2009 CX-7

Brands by name

Popular brands

Mazda 2009 CX-7, Manual

Search results

Summary of Contents for 2009 CX-7

Reviews:

Related manuals for 2009 CX-7

Brands by name

Popular brands