Mazda 2009 CX-7 Manual Download Page 171 | Manualshive

Page: 171 / 454

background image

Black plate (171,1)

Indicators

Shift position indicator

In manual shift mode, the

“

M

”

of the shift

position indicator in the instrument panel
illuminates.

Gear position indicator

The numeral for the selected gear
illuminates.

Shift position
indicator

Gear position indicator

NOTE

If the gears cannot be shifted down when
driving at higher speeds, the gear position
indicator will flash twice to signal that the
gears cannot be shifted down.

Shifting

Manually Shifting up

(M1

→

M2

→

M3

→

M4

→

M5

→

M6)

To shift up to a higher gear, tap the shift
lever back (

) once.

NOTE

l

When driving slowly, the gears may not
shift up depending on vehicle speed.

l

In manual shift mode, gears do not shift up
automatically. Don't run the engine with the
tachometer needle in the RED ZONE. If the
tachometer needle enters the RED ZONE,
you may feel engine-braking because the
fuel delivery will be stopped to protect the
engine. However, this does not indicate an
abnormality.

l

When depressing the accelerator fully, the
transaxle will shift to a lower gear,
depending on vehicle speed.

Driving Your Mazda

Starting and Driving

5-13

CX-7_8Z60-EA-08D_Edition2 Page171
Friday, May 30 2008 5:27 PM

Form No.8Z60-EA-08D

«
...
169
170
171
172
173
...
»

Summary of Contents for 2009 CX-7







































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2009 CX-7

Brand: Jeep Pages: 5

Brand: Jeep Pages: 6

Grand Cherokee SRT 2014

Brand: Jeep Pages: 345

Grand Cherokee 2015

Brand: Jeep Pages: 236

Brand: Jeep Pages: 18

Brand: Jeep Pages: 24

Brand: Jeep Pages: 560

Brand: Jeep Pages: 525

Brand: Jeep Pages: 308

Brand: Jeep Pages: 86

Brand: Jeep Pages: 638

Brand: Jeep Pages: 9

Brand: Jeep Pages: 51

Brand: Jeep Pages: 4

Brand: Jeep Pages: 50

Grand Cherokee SRT 2014

Brand: Jeep Pages: 118

2014 Grand Cherokee

Brand: Jeep Pages: 24

Brand: Jeep Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands